1. Subası, O., Oral, A., Noyan, S., Tuncozgur, O., Lazoglu, I., “In silico analysis of modular bone plates”,  Journal of the Mechanical Behavior of Biomedical Materials, DOI:10.1016/j.jmbbm.2021.104847, Vol. 124, 104842, 2021.
  2. Shahzad, A., Lazoglu, I., “Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges, Composites Part B: Engineering, 109249, 2021.
  3. Malik, A.N., Khan, S.A., Lazoglu, I., “A novel demand-actuated defrost approach based on the real-time thickness of frost for the energy conservation of a refrigerator“, International Journal of Refrigeration, In Press, 2021.
  4. Saleh, M.K.A., Ulasyar, A., Lazoglu, I., “Active damping of chatter in the boring process via variable gain sliding mode control of a magnetorheological damper“, CIRP Annals, Vol. 70:1, pp. 337-340, 2021.
  5. Subasi, O., Oral, A., Torabnia, S., Erdogan, D., Erdogan, M., Lazoglu, I., “In silico analysis of elastomer-coated cerclage for reducing sternal cut-through in high-risk patients“, ASME Journal of Biomechanical Engineering, DOI: 10.1115/1.4050912, Paper No: BIO-21-1078, April 2021.
  6. Manav, A.C., Lazoglu, I., “A novel cascade path planning algorithm for autonomous truck-trailer parking“, IEEE Transactions on Intelligent Transportation Systems, DOI: 10.1109/TITS.2021.3062701. Accepted. In press, 2021.
  7. Mustafa, S.S.,  Lazoglu, I., “A new model and direct slicer for lattice structures“, Structural and Multidisciplinary Optimization, Springer Nature. DOI: 10.1007/s00158-020-02796-w.Vol. 63, pp. 2211–2230, 2021.
  8. Saleh, M.K.A, Nejatpour, M., Acar, H.Y, Lazoglu, I., “A new magnetorheological damper for chatter stability of boring tools“, Journal of Materials Processing Technology, DOI:10.1016/j.jmatprotec.2020.116931, Vol. 289,  116931, March 2021.
  9. Aka, I.B,, Ozturk, C., Lazoglu, I., “Numerical investigation of volute tongue design on hemodynamic characteristics and hemolysis of the centrifugal blood pump“, SN Applied Sciences. DOI:10.1007/s42452-021-04142-1, Vol. 3 (1), pp. 1-9, 2021
  10. Aslan, L., Subasi, O., Demirhan, M., Seyahi, A., Lazoglu, I., “The safety and accuracy of the fluoroscopic imaging during proximal femoral fixation: A computerized 3D reappraisal of the joint penetration risk“, Injury, DOI:10.1016/j.injury.2020.11.064, Vol. 52 (6), pp. 1450-1455, 2021.
  11. Subasi, O., Aslan, L., Demirhan, M., Seyahi, A., Lazoglu, I., “A novel lower bound for tip-apex distance“, European Journal of Trauma and Emergency Surgery, DOI: 10.10.1007/s00068-020-01514-x. 2020.
  12. Khalatbari, H. and Lazoglu I.,  “Friction stir incremental forming of polyoxymethylene: process outputs, force and temperature“, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2020.1819542, Vol. 36, Issue 1, pp. 94-105, 2021.
  13. Malik, A. N., Khan, S.A., Lazoglu, I., “A novel hybrid frost detection and defrosting system for domestic refrigerators“, International Journal of Refrigeration, DOI:10.1016/j.ijrefrig.2020.05.016, Vol. 117, pp. 256-268, 2020.
  14. Subasi, O., Torabnia, S., Lazoglu, I.,  “In silico analysis of superelastic Nitinol staples for trans-sternal closure“, Journal of the Mechanical Behavior of Biomedical Materials, DOI:10.1016/j.jmbbm.2020.103770, Vol. 107,  103770, 2020.
  15. Hussain A., Layegh S.E.K., Lazoglu I., Arrazola P.J., Lazcano X, Aristimuño P-X., Subasi O, Yigit I.E., Öztürk Ç., Yavaş Ç.,  “Mechanics of milling 48-2-2 gamma titanium aluminide“, CIRP Journal of Manufacturing Science and Technology, DOI:10.1016/j.cirpj.2020.05.001, Vol. 30, pp.131-139, 2020.
  16. Hussain, A., Subasi, O., Lazoglu, I., “A Novel sensor using photo-interrupter for measuring static friction coefficient“, Journal of Mechanical Science and Technology, DOI:10.1007/s12206-020-0509-5, Vol. 34(6), 2020.
  17. Yigit, I.E., Lazoglu, I., “Spherical slicing method and its application on robotic additive manufacturing“, Progress in Additive Manufacturing, DOI: 10.1007/s40964-020-00135-5, 2020.
  18. Zahoor, A., Hassan, A., Khan, F., Lazoglu, I., “Design of a high thrust density moving magnet linear actuator with magnetic flux bridge“, IET Electrical Power Applications, DOI: 10.1049/iet-epa.2019.0789, Vol. 14, pp.1256-1262, 2020.
  19. Bijanzad, A., Hassan, A., Lazoglu, I., “Development of a new moving magnet linear compressor. Part A: Design and modeling“, International Journal of Refrigeration, DOI:10.1016/j.ijrefrig.2020.02.011,  Vol. 113, pp.70-79, 2020.
  20. Bijanzad, A., Hassan, A., Lazoglu, I., “Development of a new moving magnet linear compressor. Part B: Performance analysis“, International Journal of Refrigeration, DOI: 10.1016/j.ijrefrig.2020.01.028, Vol. 113, pp.94-102,  2020.
  21. Mustafa, S.S., Lazoglu, I., “A design framework for build process planning in DMLS“, Progress in Additive Manufacturing, DOI: 10.1007/s40964-020-00110-0, Vol.5, pp. 125-137, 2020.
  22. Khan, S.A., Lazoglu, I., “Development of additively manufacturable and electrically conductive graphite–polymer composites“, Progress in Additive Manufacturing, DOI: 10.1007/s40964-019-00102-9, Vol. 5, pp. 153-162, 2020.
  23. Subasi O., Oral A., Lazoglu I., “A novel adjustable locking plate (ALP) for segmental bone fracture treatment“, Injury, DOI:10.1016/j.injury.2019.08.034. Vol 50(3), pp.1612-1619, 2019.
  24. Yigit, I.E., Lazoglu, I., “Helical slicing method for material extrusion-based robotic additive manufacturing“, Progress in Additive Manufacturing, DOI: 10.1007/s40964-019-00090-w. Vol 4(3), pp. 225-232, 2019.
  25. Lazoglu I., Kucukaksu D.K., Ozturk C., Aka I.B., Bakuy V., Arat N., Yalcin O., Ugurel E., Erkasap P.C., Aksoy E., Ruacan S., “A short-term in vivo evaluation of the Istanbul Heart left ventricular assist device in a pig model”, Experimental and Clinical Transplantation, DOI: 10.6002/ect.2019.0110,  2019.
  26. Hussain, A., Lazoglu, I., “Distortion in milling of structural parts“, CIRP Annals, DOI: 10.1016/j.cirp.2019.04.053. Vol.68:1, pp. 105-108, 2019.
  27. Isa, M.A., Lazoglu, I., “Five-axis additive manufacturing of freeform models through buildup of transition layers“, Journal of Manufacturing Systems. DOI:10.1016/j.jmsy.2018.12.002. Vol. 50, pp.69-80, 2019.
  28. Sezgin, B., Guney, K., Lazoglu, I., Tatar, S., Layegh, E., Ozel, M, Ozmen, S., Yavuzer, R., “Defining a new variable that may ‘mpact long-term postoperative nasal tip support”, Annals of Plastic Surgery, DOI:10.1097/SAP.0000000000001600. Vol. 82, pp. 445-451, 2019.
  29. Ozturk, C., Aka, I.B., Lazoglu, I., “Effect of blade curvature on the hemolytic and hydraulic characteristics of a centrifugal blood pump“, The International Journal of Artificial Organs, DOI:10.1177/0391398818785558. Vol. 41, pp.730-737, 2018.
  30. Subasi, O., Yazgi, S.G., Lazoglu, I., “A novel triaxial optoelectronic based dynamometer for machining processes“, Sensors & Actuators: A. Physical.  DOI:10.1016/j.sna.2018.06.019. Vol. 279, pp.168-177, 2018.
  31. Bijanzad, A., Hassan, A., Lazoglu, I., “Electromechanical modeling of a novel moving magnet linear oscillating actuator“, Journal of Mechanical Science and Technology, Springer, DOI 10.1007/s12206-018-0840-2. Vol 32 (9), pp. 4423-4431, 2018.
  32. Khan, T.I., Sheh Zad, H., Lazoglu, I., Yilmaz, O., “Development of a novel shrouded impeller pediatric blood pump“, Journal of Artificial Organs, DOI: 10.1007/s10047-018-1028-3. Vol. 21(2), pp.142-149,  2018.
  33. Pekkan, K., Emek, E., Aka, I.B., Tutsak, E., Balim, H., Lazoglu, I., Turkoz, R, “In vitro validation of a self-driving aortic-turbine venous-assist device for the fontan patients“, The Journal of Thoracic and Cardiovascular Surgery, DOI:10.1016/j.jtcvs.2018.02.088. Vol.156 (1), pp.292-301.e7, July 2018.
  34. Ulasyar, A, Lazoglu, I., “Design and analysis of a new magneto rheological damper for washing machine“, Journal of Mechanical Science and Technology, Springer, DOI:10.1007/s12206-018-0308-4. Vol. 32(4), pp. 1549-1561, 2018.
  35. Sheh Zad, H., Khan,T., Lazoglu, I., “Design and adaptive sliding mode control of hybrid magnetic bearings“, IEEE Transactions on Industrial Electronics, DOI:10.1109/TIE.2017.2739682, Vol: 65:3, 2018.
  36. Birbilen, U. M., Lazoglu, I., “Design and analysis of a novel miniature tubular linear actuator“, IEEE Transactions on Magnetics, DOI:10.1109/TMAG.2017.2782688. Vol.54, No.4, Sequence number:8202306, 2017.
  37. Kundakcioglu, E., Lazoglu, I., Poyraz, O., Yasa, E., Cizicioglu, N., “Thermal and molten pool model in selective laser melting process of Inconel 625“, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1489-1. Vol 95:9, pp.3977-3984, 2018.
  38. Isa, M.A., Lazoglu, I., “Design and analysis of a 3D laser scanner“, Measurement, Elsevier, DOI: 10.1016/j.measurement.2017.07.028, Vol.111, pp.122-133, 2017.
  39.  Lazoglu, I., Poulachon, G., Ramirez, C., Akmal, M., Marcon, B., Rossi, F., Krebs, M., “Thermal analysis in Ti-6Al-4V drilling“, CIRP Annals, DOI:10.1016/j.cirp.2017.04.020.  Vol.66:1, pp. 105-108, 2017.
  40. Layegh, E., Lazoglu, I., “3D Surface topography analysis in 5-axis ball-end milling“, CIRP Annals, DOI:10.1016/j.cirp.2017.04.021. Vol. 66:1, pp.133-136, 2017.
  41. Hassan, A., Bijanzad, A. Lazoglu, I., “Dynamic analysis of a novel moving magnet linear actuator“, IEEE Transactions on Industrial Electronics, DOI: 10.1109/TIE.2016.2645506. Vol.64, No:5, pp.3758-3766, May 2017.
  42. Bijanzad, A., Hassan, A., Lazoglu, I., “Analysis of selenoid based linear compressor for household refrigerator“, International Journal of Refrigeration, DOI: 10.1016/j.ijrefrig.2016.10.015.  Vol. 74, pp. 114-126, February 2017.
  43. Lazoglu, I., Mamedov, A., “Deformation of thin parts in micro milling“, CIRP Annals, DOI: 10.1016/j.cirp.2016.04.077, Vol. 65:1, pp. 117-120, 2016.
  44. Mamedov, A., Lazoglu, I.,  “An evaluation of micro milling chip thickness models for the process mechanics“, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-016-8584-6,  Vol.87, Issue 5, pp.1843-1849, 2016.
  45. Mamedov, A., Lazoglu, I., “Thermal analysis of micro milling Titanium alloy Ti-6Al-4V“, Journal of Materials Processing Technology, DOI: 10.1016/j.jmatprotec.2015.10.019. Vol. 229, pp.659-667, 2016.
  46. Islam, C., Lazoglu, I., Altintas, Y., “A three-dimensional transient thermal model for machining“, American Society of Mechanical Engineers (ASME), Journal of Manufacturing Science and Engineering, DOI: 10.1115/1.4030305. Vol. 138, Issue 2, pp: 021003-1/021003-17, April 2016.
  47. Kundakcioglu, E., Lazoglu, I., Rawal, S., “Transient thermal modeling of laser-based additive manufacturing for 3D freeform structures“, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7932-2. Vol. 85, Issue 1, pp.493-501, 2016.
  48. Mamedov, A., Lazoglu, I., “Micro ball-end milling of freeform titanium parts“, Advances in Manufacturing, Springer, DOI: 10.1007/s40436-015-0123-4 , Vol.3, pp.263-268, 2015.
  49. Bugdayci, B., Lazoglu, I., “Temperature and wear analysis in milling of aerospace grade aluminum alloy Al-7050“, Production Engineering Research & Development, Springer, DOI: 10.1007/s11740-015-0623-x. Vol. 9, Issue 4, pp 487-494, 2015.
  50. Celik, A., Lazoglu, I., Kara, A., Kara, F., “Wear on SiAlON ceramic tools in drilling of aerospace grade CFRP composites“, (doi:10.1016/j.wear.2015.05.009), Wear, Volumes:338-339, pp. 11-21, 2015.
  51. Celik, A., Lazoglu, I., Kara, A., Kara, F.,  “Investigation on the performance of SiAlON ceramic drills on aerospace grade CFRP composites“, Journal of Materials Processing Technology, DOI: 10.1016/j.jmatprotec.2015.03.040, Vol. 223, pp. 39-47, 2015.
  52. Boz, Y., Erdim, H., Lazoglu, I., “A Comparison of solid model and three-orthogonal dexelfield methods for cutter-workpiece engagement calculations in 3 and 5 axis virtual milling“, International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7251-7. Vol 81, 811-823, 2015.
  53. Layegh, E., Yigit, I.E., Lazoglu, I., “Analysis of tool orientation for 5-Axis ball-end milling of flexible parts“, CIRP Annals, DOI:10.1016/j.cirp.2015.04.067. Vol.64:1, 97-100, 2015.
  54. Mamedov, A., Layegh, E., Lazoglu, I., “Instantaneous tool deflection model for micro milling“, International Journal of Advanced Manufacturing Technology, DIO: 10.1007/s00170-015-6877-9. Vol. 79, Issue 5, pp.769-777, 2015.
  55. Erbulut, D., Zafarparandeh, I., Hassan, C.R., Lazoglu, I., Ozer, A.F., “Determination of biomedical effect of interspinous process device on implanted and adjacent lumbar spinal segments using a hybrid testing protocol: a finite element study“, Journal of Neurosurgery: Spine, DOI:10.3171/2014.12.SPINE14419, May1:1-9, 2015.
  56. Oktenoglu, T., Erbulut, D.U., Kiapour, A., Ozer, A.F., Lazoglu, I., Kaner, T., Sasani, M., Goel, V.K, “Pedicle screw-based posterior dynamic stabilization of the lumbar spine: In vitro cadaver investigation and a finite element study“, Computer Methods in Biomechanics and Biomedical Engineering, Vol.18, No:11, pp.1252-1261, 2015.
  57. Lazoglu, I. and Bugdayci, B., “Thermal modeling of end milling“, CIRP Annals.DOI:10.1016/j.cirp.2014.03.072. Vol. 63:1, pp.113-116, 2014.
  58. Altintas, Y., Kersting, P., Biermann, D., Budak, E., Denkana, B., Lazoglu, I., “Virtual process systems for part machining operations“, CIRP Annals, DOI:10.1016/j.cirp.2014.05.007. Vol. 63:2, pp.585-605, 2014.
  59. Fergani, O., Lazoglu, I., Mkaddem, A., El Mansori, M., Liang, S.Y.,  “Analytical modeling of residual stress and the induced deflection of a milled thin plate“, International Journal of Advanced Manufacturing Technology, DOI:10.1007/s00170-014-6146-3. Vol.: 75, Pages: 455-463, 2014.
  60. Fergani, Omar; Mamedov, Ali; Lazoglu, Ismail; Yang, Jianguo;Liang, Steven Y., “Prediction of residual stress induced distortions in micro-milling of Al7050 thin plate“, Applied Mechanics and Materials, DOI: 10.4028/www.scientific.net/AMM.472.677, Vol:472, pp.677-681, 2014.
  61. Erbulut, D.,  Zafarparandah, I., Lazoglu, I., Ozer, A.F., “Application of an asymmetric finite element model of the C2-T1 cervical spine for evaluating the role of soft tissues in stability“, Medical Engineering and Physics, Volume 36, Issue 7, pp. 915-921, 2014.
  62. Zafarparandah,I., Erbulut, D., Lazoglu, I., Ozer, A.F., “Development of a finite element model of the human cervical spine“, Journal of Turkish Neurosurgery,  Vol. 24:2, pp. 1-7, 2014.
  63. Erkorkmaz, K., Layegh, E., Lazoglu, I., Erdim, H.,  “Feedrate optimization for freeform milling considering constraints from the feed drive system and process mechanics“, CIRP Annals, Vol. 62, pp.395-398, 2013.
  64. Manav, C., Bank, H.S., Lazoglu, I., “Intelligent toolpath selection via multi-criteria optimization in complex sculptured surface milling“, Journal of Intelligent Manufacturing,  Vol. 24, pp. 349-355, 2013.
  65. Boz, Y., Lazoglu, I., “A Postprocessor for table-tilting type five-axis machine tool based on generalized kinematics with variable feedrate implementation“, International Journal of Advanced Manufacturing Technology,  Vol.66, Issue 9-12, 1285-1293, 2013.
  66. Lazoglu, I., Islam, C., “Modelling of 3D temperature fields for oblique machining“, CIRP Annals, Vol. 61/1, pp.127-130, 2012.
  67. Altunlu, A.C., Lazoglu, I., Oguz, E., Kara, S., “An investigation on the impact fatigue characteristics of valve leaves for small hermetic reciprocating compressors in a new automated test system“, Fatigue and Fracture of Engineering Materials and Structures, Vol. 35, Issue 9, pp. 826-841, 2012.
  68. Lazoglu, I., Boz, Y., Erdim, H., “Five-axis milling mechanics for complex free form surfaces“, CIRP Annals, DOI:10.1016/j.cirp.2011.03.090. Vol. 60/1, pp.117-120, 2011.
  69. Demir, O., Biyikli, E., Lazoglu, I., Kucukaksu, S., “Design of a new centrifugal blood pump: Heart Turcica Centrifugal“, Artificial Organs,  DOI: 10.1111/j.1525-1594.2010.01167.x, Vol.35, Issue 7, pp.720-725 , 2011.
  70. Cerit, E., Lazoglu, I., “A CAM-based path generation method for rapid prototyping applications“, International Journal of Advanced Manufacturing Technology, Vol. 56, pp. 319-327, 2011.
  71. Basturk,S., Senbabaoglu, F., Islam, C., Erten, M., Lazoglu, I., Gulmez, T., “Titanium machining with new plasma boronized cutting tools“, CIRP Annals, Vol. 59, pp.101-104, 2010.
  72. Boz, Y. , Demir, O., Lazoglu, I., “Model based feedrate scheduling for free-form surface machining“, International Journal of Automation Technology, Fuji Technology Press, Japan, pp. 273-283, Vol. 4, No. 3, 2010.
  73. Senbabaoglu, F., Lazoglu, I., Ozkeser, S., “Experimental analysis of boring process on automotive engine cylinders“, International Journal of Advanced Manufacturing Technology, Vol.48, pp. 11-21, 2010.
  74. Lazoglu, I., Manav, A.C., Murtezaoglu, Y., “Tool path optimization for free form surface machining“, CIRP Annals, Vol. 58 / 1, pp. 101-104, 2009.
  75. Ulutan, D., Lazoglu, I.,Dinc, C., “Three dimensional temperature prediction in machining processes using finite difference method“, Journal of Materials Processing Technology, Elsevier Science Ltd., Vol.209, pp.1111-1121, 2009.
  76. Manav, A.C., Akgun, E., Lazoglu, I., “Improving free form surface machining performance by ball end milling model“, International Journal of Design Engineering, Vol.1, No. 4,  pp.434-444, 2008.
  77. Lazoglu, I., Ulutan, D.,Alaca, B.E., Engin, S., “An enhanced analytical model for residual stress prediction in machining“, CIRP Annals, Vol. 57, Issue:1, pp 81-84, 2008.
  78. Kaymakci, M.,  Lazoglu, I., “Tool path selection strategies for complex sculptured surface machining“, Machining Science and Technology, An International Journal,  Taylor & Francis Group, Vol.12, Issue 1, pp. 119-132, 2008.
  79. Dinc, C.,  Lazoglu, I., Serpenguzel, A., “Analysis of thermal fields in orthogonal machining with infrared imaging“, Journal of Material Processing Technology,  Elsevier Science Ltd., Vol. 198, pp.147-154, 2008.
  80. Otkur, M., Lazoglu, I., “Trochoidal milling“, International Journal of Machine Tools and Manufacture, Elsevier Science Ltd.,  Vol.47, pp.1324-1332, 2007.
  81. Ulutan, D., Alaca, B. E., Lazoglu, I., “Analytical modeling of residual stresses in machining“, Journal of Materials Processing Technology, Elsevier Science Ltd.,  Vol. 183, Issue 1, pp.77-87, 2007.
  82. Erdim, H., Lazoglu, I., Kaymakci, M., “Free-form surface machining and comparing feedrate scheduling strategies“, Machining Science and Technology,  An International Journal, Taylor & Francis Group, Vol. 11, Issue 1,  pp.117-133, 2007.
  83. Kaymakci, M., Lazoglu, I., Murtezaoglu, Y., “Machining of complex sculptured surfaces with feedrate scheduling“, International Journal of Manufacturing Research, Special Edition on Sculptured Surfaces, Inderscience Publishers, Vol.1, No.2, pp.157-175, 2006.
  84. Lazoglu, I., Kratz.H., Buyukhatipoglu, K., Klocke, F., “Forces and temperatures in hard turning“, Machining Science and Technology,  An International Journal, Taylor & Francis Group, Vol.10, No:2, pp. 157-179,  2006.
  85. Erdim, H., Lazoglu, I., Ozturk, B., “Feedrate scheduling strategies for free-form surfaces“,  International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., Vol. 46, pp.747-757, 2006.
  86. Ozturk, B., Lazoglu, I.,  “Machining of free-form surfaces – part I: Analytical chip load” International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., Vol.46, pp.728-735, 2006.
  87. Ozturk, B., Lazoglu, I., Erdim, H.,  “Machining of free-form surfaces – part II: Calibration and forces“, International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., Vol.46, pp.736-746, 2006.
  88. Pirtini, M. and Lazoglu, I. “Forces and hole quality in drilling“, International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., 45/11 pp. 1271-1281, 2005.
  89. Guzel, B.U.,  Lazoglu, I., “An enhanced force model for sculptured surface machining“, Machining Science and Technology, An International Journal,  Marcel-Dekker Inc., Vol. 8, No. 3, pp.431-448, 2004.
  90. Budak, E., Lazoglu, I., Guzel, B.U., “Improving cycle time in sculptured surface machining sculptured surface machining through force modeling“, CIRP Annals, Vol.53/1, pp.103-106, 2004.
  91. Guzel, B.U and  Lazoglu I., “Increasing productivity in sculptured surface machining via off-line piecewise variable feedrate scheduling based on the force system model“, International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., Volume 44, Issue 1, Pages 21-28, January 2004.
  92. Lazoglu,I., “Sculpture surface machining: A generalized model of ball-end milling force system“, International Journal of Machine Tools and Manufacture, pp.453-462, Vol. 43, April 2003.
  93. Atabey, F., Lazoglu, I., Altintas, Y., “Mechanics of boring processes–part I“, International Journal of Machine Tools and Manufacture, pp.463-476, Vol. 43, April 2003.
  94. Atabey, F., Lazoglu, I., Altintas, Y., “Mechanics of boring processes–part II: Multi-insert boring heads“, International Journal of Machine Tools and Manufacture, pp.477-484, Vol. 43, April 2003.
  95. Lazoglu, I., Atabey, F.  and Altintas, Y.,  “Dynamics of boring processes–part III: Time domain modeling“, International Journal of Machine Tools and Manufacture, pp. 1567-1576, Volume 42, November 2002.
  96. Lazoglu, I. and Altintas, Y., “Prediction of tool and chip temperature in continuous and interrupted machining“, International Journal of Machine Tools and Manufacture, pp. 1011-1022, Volume 42, Issue 9, July 2002.
  97. Lazoglu, I. and Liang, S.Y., “Modeling of ball-end milling forces with cutter axis inclination“, the ASME Journal of Manufacturing Science and Engineering, pp. 3-11, Volume 122, 2000.
  98. Ehmann, F.K, Kapoor, S.G., DeVor, R.E., Lazoglu, I. “Machining process modeling: A review“, an invited paper in the 75th Anniversary Issue of the ASME Journal of Manufacturing Science and Engineering, Vol. 119, pp. 655-663, 1997.
  99. Lazoglu, I. and Liang, S.Y., “Analytical modeling of ball-end milling forces“, Machining Science and Technology,  An International Journal, Marcel-Dekker Inc., Vol. 1, Issue 2, pp. 219-234, 1997.