Type the word you want to search for and press ENTER.
A-Z Content, Page Guide
ABC-ÇDGJMPRT
Conference Proceedings

  1. Oral, A., Haque, U.U., Yalçın, Ö., Lazoglu, I., “Parametric analysis in crankshaft design for the reciprocating compressors”, 13th International Conference on Compressors and their Systems, 11-13 September 2023, London, UK,
  2. Bilgili, D., Kecibas, G., Besirova, C., Chehrehzad, M.R., Burun, G., Pehlivan, T., Uresin, U., Emekli, E., Lazoglu, I., “Tool flank wear prediction using high-frequency machine data from industrial edge device”, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 13-15 July 2022, Naples, Italy. Procedia CIRP, Vol. 118, pp. 483-488, 2023.
  3. Malik, A.N.; Pashak, P.; Lazoglu, I; Şahin, Ç., “A low-cost photoelectric based displacement measurement system to quantify valve lift motion in reciprocating type compressors”, Herrick Conferences, Purdue, USA, July 10-14, 2022.
  4. Oral, A.; Lazoglu, I.; Kerpicci, H.; Tuysuz, S., “Mathematical model for the mechanical losses and validation experiments”, Herrick Conferences, Purdue, USA, July 10-14, 2022.
  5. Beşirova, C., Akhtar, W., Shahzad, A., Üresin, U., Çelikel, S., Halifeoğlu, S., İrican, M., Lazoğlu, I., “Analysis of machining process with data collection using industrial edge computing”,  11th International Conference on Machining, 2021.
  6. Torabnia, S., Mihcin, Ş., Lazoglu, I., “Parametric analysis for the design of hip joint replacement simulators“, 16th IEEE International Symposium on Medical Measurements and Applications (MeMeA),  DOI:10.1109/MeMeA52024.2021.9478689, 23-25 June 2021, Neuchâtel, Switzerland.
  7. Hussain A., Layegh S.E.K., Lazoglu, I., Subasi, O., Yigit, I.E.,  Öztürk, Ç., Yavaş, Ç., “Free-Form Ball-End Milling of 48-2-2 Gamma Titanium Aluminide”, UTIS 2019, November 2019, Antalya, Türkiye.
  8. Khan, S. A., Lazoglu, I., “De-Icing Using Additively Manufactured Heating Element”, AMCTURKEY 17-18 October 2019, Istanbul, Türkiye.
  9. Yigit, I.E., Lazoglu, I., “Dynamic Build Bed for Additive Manufacturing”, The 30th Annual International Solid Freeform Fabrication Symposium, August 2019, Austin, TX, USA.
  10. Yigit, I.E., Isa, M. Lazoglu, I., “Additive Manufacturing with Modular Support Structures”, The 29th Annual International Solid Freeform Fabrication Symposium, August 13-15, 2018, Austin, TX, USA.
  11. Isa, M., Yigit, I.E., Lazoglu, I., “Analysis of Additive Manufacturing Build Direction on Overhang Structures”, The 29th Annual International Solid Freeform Fabrication Symposium, August 13-15, 2018, Austin, TX, USA.
  12. Hussain A, Lazoglu I, Layegh S.E., Yavaş C., “Machining of γ-TiAl”, 9th International Congress on Machining, Nov. 2018, Antalya, Türkiye.
  13. Mustafa, S.S., Lazoglu, I., “Design and development of an additive manufacturing system for metal printing”, 18th International Conference on Machine Design and Production, July 3-6,2018, Eskisehir, Türkiye.
  14. Isa, M. A., Lazoglu, I., “Using multi-axis additive manufacturing in support-less part fabrication”, 18th International Conference on Machine Design and Production, July 3-6,2018, Eskisehir, Türkiye.
  15. Yigit, I.E., Lazoglu, I., “Robotic additive manufacturing of tooling for composite structures”, 18th International Conference on Machine Design and Production, July 3-6,2018, Eskisehir, Türkiye.
  16. Kucukaksu, D.S., Lazoglu, I., Aka, I.B., Ozturk, C., Arat, N., Bakuy, V., Aksoy, E., Erkasap, P., Ugurel, E., Yalcin, O., Ruacan, S., “The Results Of Experimental Animal Study Of The First Left Ventricular Assist Device Of Türkiye: Istanbul Heart Vad (iheart® Vad)”, the 14th International Congress of Update in Cardiology and Cardiovascular Surgery, April 5-8, 2018, Antalya, Türkiye.
  17. Yazgi, S.G., Subasi, O., Lazoglu, I., “Development of a Novel Mini Dynamometer: DynoMARC”, 8th International Congress on Machining, Nov. 8-10, 2017, Antalya, Türkiye.
  18. Akmal M., Yazgi, S.G., Lazoglu I., Akgun, A., Yavas, C., “Friction Analysis on AlTiN Coated and Uncoated Carbide Tools in Milling of Al7050”, 8th International Congress on Machining, Nov. 8-10, 2017, Antalya, Türkiye.
  19. Akmal M., Layegh, E., Lazoglu I., Akgun, A., Yavas, C., “Friction Coefficients on Surface finish of AlTiN Coated Tools in the Milling of Ti6Al4V”, 16th CIRP Conference on Modeling of Machining Operations, June 2017, Cluny, France./DOI:10.1016/j.procir.2017.03.231 . Procedia CIRP, pp.596-600, 2017.
  20. Shams, S., Lazoglu, I., “A Monolothic Opto-coupler based Sensor for Contact Force Detection in Artitifial Hand”, IEEE Explore, 978-1-5090-4059-9/16, pp. 186-189, 2016.
  21. Akmal, M., Layegh, E., Lazoglu, I., Akgun, A., Yavas, C., “Analysis of Surface Finishing Techniques and Coating Materials in High Performance Milling of Aerospace Grade Titanium Alloys”, 17th International Conference on Machine Design and Production, July 12-15, 2016, Bursa, Türkiye
  22. Khalatbari, H., Lazoglu, I., Durgun, I., “Implicit Finite Element Simulation of Incremental Sheet Forming Process”,17th International Conference on Machine Design and Production, July 12-15, 2016, Bursa, Türkiye.
  23. Mamedov, A. and Lazoglu, I., “Temperature Modeling of Micro Milling Process”, 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM21 2015, Kyoto, Japan, October 2015.
  24. Layegh, E., Yigit, I.E., Lazoglu, I., “A Solid Modeler Kernel based Engagement Model for 5-axis Ball End Milling”,  15th CIRP Conference on Modeling of Machining Operations, Procedia CIRP,  Karlsruhe, Germany,  2015.
  25. Fergani, O., Shao, Y.,  Lazoglu, I.,  Liang, S.Y., “Temperature Effects on Grinding Residual Stress”,  6th CIRP International Conference on High Performance Cutting, HPC2014, Univ. of California Berkeley,  USA, June 2014. / Procedia CIRP, Volume 14, pp.2-6, 2014.
  26. Layegh, E., Lazoglu, I., “A New Identification Method of Specific Cutting Coefficients for Ball End Milling”,  6th CIRP International Conference on High Performance Cutting, HPC2014, Univ. of California Berkeley,  USA, June 2014. / Procedia CIRP, Volume 14, pp.182-187, 2014.
  27. Mamedov, A., Yigit, I.E., Lazoglu, I., “Force Model for Micro Milling of Free Form Surfaces”, 16th International Conference on Machine Design and Production, June 30-July 03, 2014, Izmir, Türkiye.
  28. Layegh, S.E.K., Yigit, I.E., Lazoglu, I., “The Effect of Tool Orientation on Five Axis Ball End Milling of Ti6Al4V”, 16th International Conference on Machine Design and Production, June 30-July 03, 2014, Izmir, Türkiye.
  29. Ozgen, B., Lazoglu, I., Durgun, I., “Experimental Investigation of the Process Parameters on the Forming Forces for Single Point Incremental Forming”, 16th International Conference on Machine Design and Production, June 30-July 03, 2014, Izmir, Türkiye.
  30. Comert, S., Ozturk, C., Lazoglu, I., Yalcin, O., Atac, N., Kucukaksu, S., “In Vitro Hemolytic Performance Evaluation of a New Implantable Centrifugal Heart Pump (Istanbul VAD) with an Optimized Design”,  International Society of Rotary Blood Pump Conference, San Francisco, CA, USA, Publisher: Artificial Organs, Sept., 2014
  31. Fergani, O., Mamedov, A.,Lazoglu, I, Yang, J.,Liang, S.Y.,Prediction of residual stress induced distortions in micro-milling of Al7050 thin plate,  4th International Conference on Mechanical Science and Technology (ICMSE 2014), Jan, 2014, Sanya, Peoples R. China, Publisher: Trans Tech Publications Ltd, Switzerland, 2014.
  32. Buyukyazi, T., Bayraktar, S., Lazoglu,I., “A Novel Mosaic Quality Measurement Method For UAV Surveillance and Remote Sensing”, International Society of Photogrammetry and Remote Sensing (ISPRS) 2013,  Antalya, International Society of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol.: XL-7/W2, Pages: 55-60, Nov., 2013.
  33. Mamedov, A., Layegh, K.S.E., Lazoglu, I., “Machining Forces and Tool Deflections in Micro Milling”, 14th CIRP Conference on Modeling of Machining Operations, Torino, Italy, June 13th – 14th, 2013./ Procedia CIRP, Volume 8, pp. 147-151, 2013.
  34. Layegh, S.E., Lazoglu, I., Erdim, H., “Tool Deflection in Five-Axis Milling”, 7th International Conference on  Design and Production of Machines and Dies/Molds, Antalya, Türkiye, 2013.
  35. Layegh, E., Erdim, H., Lazoglu, I., “Offline Force Control and Feedrate Scheduling for Complex Free From Surfaces in 5-Axis Milling”, 5th CIRP High Performance Cutting Conference, Zurich-Switzerland, 4-7 June 2012.
  36. Layegh, S.E., Lazoglu, I., Erdim, H., “Effects of Lead and Tilt Angels on Cutting Forces, Torque and Cutting Power in Five-Axis Sculptured Surface Milling”, 15th International Conference on Machine Design and Production, Denizli, Türkiye, 2012.
  37. Bank, H.S., Lazoglu, I., “Development of a New Hybrid Laser Workstation for Additive Manufacturing and Laser Machining”, 15th International Conference on Machine Design and Production, Denizli, Türkiye, 2012.
  38. Fergani, O., Lazoglu, I., Amon, L., Engin, S., “Three Dimensional Model for Predicting Residual Stresses in Oblique Machining based on Contact Mechanics”, 15th International Conference on Machine Design and Production, Denizli, Türkiye, 2012.
  39. Bugdayci, N.B., Lazoglu, I., Akcay, R., “Comparative Study on Performance of Different Helical End Mills in Milling of Al-7050”, 15th International Conference on Machine Design and Production, Denizli, Türkiye, 2012.
  40. Fergani, O., Bugdayci, N.B., Atalay, F., Ozdemir, O., Lazoglu, I., Akcay, R., “Bone Milling: Heat Generation and the Effects of Osteon Orientation on the Cutting Forces”, 15th International Conference on Machine Design and Production, Denizli, Türkiye, 2012.
  41. Boz, Y., Erdim, H., Lazoglu, I., “Modeling Cutting Forces for Five Axis Milling of Sculptured Surfaces”, 13th CIRP Conference on Modeling of Machining Operations, Sintra-Lisbon, Portugal, 2011. / Advanced Materials Research Vol. 223 (2011), pp.701-712.
  42. Boz, Y., Erdim, H., Lazoglu, I., “Prediction of Cutting Forces for 5-Axis Ball-End Milling of Free-Form Surfaces”, Proceedings of 4th CIRP International Conference on High Performance Cutting, Gifu, Japan, October  2010.\
  43. Altunlu, A.C., Lazoglu, I., Oguz, E., Kara, S., “Impact Fatigue Characteristics of Valve Leaves for Small Hermetic Reciprocating Compressor”, International Compressor Engineering Conference at Purdue, USA, July  2010.
  44. Demir, O.,Islam, C., Lazoglu, I., Aygin, E.,Sipahioglu, C.,Ilgaz, O.,Ates, O., “Thermal and Mechanical Analysis of Machining Ti6Al4V and Inconel718”,  14th International Conference on Machine Design and Production, N.Cyprus, June 2010.
  45. Boz., Y., Lazoglu, I., “A Generic Postprocessor for Table-Tilting Type Five-Axis Machine Tool with Variable Feedrate”,  14th International Conference on Machine Design and Production, N.Cyprus, June 2010.
  46. Boz., Y., Erdim, H., Lazoglu, I., “Modeling Cutting Forces for 5-Axis Machining of Sculptured Surfaces”,  CIRP-International Conference on Process Machine Interactions, Vancouver, Canada, June 2010.
  47. Manav, C., Bank, S.H., Lazoglu, I., “Multi-Criteria Toolpath Optimization For Free Form Surface Machining”,  CIRP-International Conference on Process Machine Interactions, Vancouver, Canada, June 2010.
  48. Lazoglu, I., Ulutan, D., Alaca, B.E., Engin, S., “An Enhanced Analytical Model for Residual Stress Prediction in Machining”,  58th CIRP General Assembly, Manchester, England, August 2008.
  49. Manav, C.A., Akgun, E., Lazoglu, I., ” Process Optimization of Free Form Surface Machining”, Proceedings of the 13th International Conference on Machine Design and Production, pp. 217-228, Istanbul, September 2008.
  50. Cerit, E., Demir, O., Lazoglu, I., “Development of An Open-Architecture Rapid Prototyping System”, Proceedings of the 13th International Conference on Machine Design and Production,  pp. 149-156, Istanbul, September 2008.
  51. Lazoglu,I., Ulutan, D., Dinc, C., “3D Temperature Fields in Machining”, 3rd CIRP International HPC Conference, Dublin, Ireland, June 2008.
  52. Kaymakci, M. and Lazoglu, I., “Tool Path Selection Strategies for Complex Sculptured Surfaces”, 10th CIRP International Workshop on Modeling of Machining Operations, Calabria, Italy, August 2007.
  53. Dinc, C., Lazoglu, I., Serpenguzel, A., “High Precision Infrared Thermal Measurements in Orthogonal Machining”, Conference on Design and Production of Machines and Dies/Molds, DM-30, Cesme / Izmir, Türkiye, June 2007.
  54. Otkur, M., Lazoglu, I., “Tool Wear in Trochoidal Hard Milling”, Conference on Design and Production of Machines and Dies/Molds, DM-31, Cesme / Izmir, Türkiye, June 2007.
  55. Lazoglu, O. Demir, G. Yildiz, C. Ersanli, S. Kucukaksu, A. F. Okyar, N. Ciblak, M. Sehirlioglu, M. Akgun, E. Sorguven, H. Ahn, K. Safak, N. Egrican, “From Concept to the Prototype of Heart Turcica Centrifugal:Development of the First Implantable Centrifugal Left Ventricular Assist System in Türkiye”, 1. National Artificial Organs and Support Systems Congress, Istanbul / Türkiye, June 2007.
  56. Ciblak, N., Okyar, A. F., Sorguven,  E. , Akgun, M. A. , Kucukaksu, S., Ahn H., Safak,K., Egrican, N., Ozsoy,B., Yenigul, O., Sehirlioglu,  M.,  Lazoglu, I., Budak, E., “Analysis and Development of Heart Turcica Axial: Development of the First Implantable Axial Left Ventricular Assist System in Türkiye”, 1. National Artificial Organs and Support Systems Congress, Istanbul / Türkiye, June 2007.
  57. Küçükaksu, S., Göksedef, D., Bülbül,S., Yıldız, C. E., Lazoglu, I., N. Çıblak, Akgün, M., Okyar, A. F., Sorgüven, E., Şafak, K., Ahn,  H.,  Şehirlioğlu,M., Uçak,C., Eğrican, N., “Development of the First Turkish Miniature and Implantable Centrifugal Heart Pump Support System: Heart Turcica-2”,  9th  National Congress of Turkish Society of Cardiovascular Surgery,  Antalya / Türkiye, November 2006.
  58. Otkur, M., Lazoglu, I., “Trochoidal Milling”, The CIRP International Conference on High Performance Cutting, Vancouver, BC, Canada, June, 2006.
  59. Erdim, H., Lazoglu, I., Kaymakci, M.,”Free-Form Surface Machining and Comparing Feedrate Scheduling Strategies”, The CIRP International Conference on High Performance Cutting, Vancouver, BC, Canada, June, 2006.
  60. Erdim, H., Lazoglu, I., “Feedrate Scheduling Strategies for Free-Form Surfaces”, Proceedings of the Japan Society of Mechanical Engineers – International  Conference on Leading Edge Manufacturing in 21st Century (LEM21), pp.1121-1126, Nagoya, Japan, October, 2005. (H. Erdim received “The Outstanding Young Researcher Award” for this paper from the Japan Society of Mechanical Engineers- LEM21 Conference Organizing Committee)
  61. Ozturk, B., Lazoglu, I., “An Analytical Model for Engagement Regions in Machining of 3D Free-Form Surfaces”, Proceedings of the Japan Society of Mechanical Engineers – International  Conference on Leading Edge Manufacturing in 21st Century (LEM21),  pp.1127-1132, Nagoya, Japan, October, 2005.
  62. Buyukhatipoglu, K., Lazoglu, I.,  Kratz, H. and Klocke, F., “Mechanics and Dynamics of Hard Turning Process”, American Society of Mechanical Engineers – International Mechanical Engineering Congress, Proceedings of IMECE04, MED / IMECE2004-61067, Anaheim, California – USA, November, 2004.
  63. Pirtini, M., Lazoglu, I., “Dynamic Forces and Hole Quality in Drilling Process”, American Society of Mechanical Engineers – International Mechanical Engineering Congress, Proceedings of IMECE04, MED / IMECE2004-61065,  Anaheim, California – USA, November, 2004.
  64. Guzel, B.U.,  Lazoglu, I., Huang,  X.,  Yip-Hoi, D., Erdem,H., Ozturk, B., “Improving Productivity in Die and Mold Machining”, CIRP International Conference on Design and Production of Dies and Molds, pp.25-35, Bursa, June 2004.
  65. Guzel, B.U. and  Lazoglu I., “Sculpture Surface Machining”, Proceedings of The Japan Society of Mechanical Engineers – International   Conference on Leading Edge Manufacturing in 21st Century, pp. 473-478, Niigata, Japan, November 2003.
  66. Lazoglu, I., Buyukhatipoglu, K. and Altintas, Y. , “Temperature Predictions in Machining”, Proceedings of The Japan Society of Mechanical Engineers – International  Conference on Leading Edge Manufacturing in 21st Century, pp. 645-650, Niigata, Japan, November 2003.
  67. Ostafiev, D., Lazoglu, I., Atabey, F., and Altintas, Y., “Mechanics and Dynamics of Boring Processes”, Proceedings of the 6th CIRP International Workshop on Modeling Machining Operations, pp. 131-149, May 2003, McMaster University, Hamilton, Ontario, Canada.
  68. Lazoglu, I., “Generalized Mechanistic Force System Model of Ball End Milling Force System for Sculpture Surface Machining”, Proceedings of the Manufacturing Engineering Division, the ASME International Mechanical Engineering Congress, New York, November 2001.
  69. Lazoglu, I., “Mechanistic Modeling of Ball End Milling Force System for Machining of Sculpture Surfaces”, CIRP 2nd International Conference and Exhibition on Design and Productions of Dies and Molds, Kusadasi, Türkiye, DM 06, May, 2001.
  70. Lazoglu, I. and Altintas, Y., “Prediction of Tool and Chip Temperature in Continuous Metal Cutting and Milling”, The ASME International Mechanical Engineering Congress, Manufacturing Engineering Division (MED)-Vol 11, Orlando, November 2000.
  71. Lazoglu, I., Vogler, M., Kapoor, S.G., DeVor, R.E. “Dynamics of the Simultaneous Turning Process”, Transactions of the North American Manufacturing Research Conference, NAMRC XXVI, pp. 135-140, 1998.
  72. DeVor, R.E., Kapoor, S.G., Zhu, R., Jacobus, K., Lazoglu, I., Sastry, S., Vogler, M., “Development of Mechanistic Models For the Prediction of Machining Performance: Applications to Process and Product Quality”, C.I.R.P. International Workshop on Modeling of Machining Operations, p. 2D/5-1, 1998
  73. Lazoglu, I. and Liang, S.Y., “An Improved Analytical Modeling of Force System in Ball-End Milling”, American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress, MED-Vol. 6-2, Manufacturing Science and Technology, Vol. 2, pp. 135-142, 1997.
  74. Lazoglu, I. and Liang, S.Y., “Feedrate Optimization on Complex Workpieces for CNC Milling Machines”, the Physics of Machining Processes III (editors: D.A. Stephenson and R.A. Stevenson), the TMS Publication, pp. 129-138, 1996.
  75. Lazoglu, I. and Liang, S.Y., “Milling Force Analysis for Complex Workpieces”, Proceedings of Thirteenth Symposium on Engineering Applications of Mechanics, Manufacturing Science and Engineering, the Canadian Society of Manufacturing Engineering Forum, pp. 373-381, 1996.
  76. Lazoglu, I. and Liang, S.Y., “Analysis of Force System in Ball-End Milling”, ASME International Mechanical Engineering Congress, Manufacturing Science and Engineering, MED, Vol. 2-1, MH. Vol. 3-1, pp. 179-187, 1995.
  77. Lazoglu, I. and Liang, S.Y., “Dynamic Cutting Forces in Ball-End Milling”, Proceedings of International Conference on Recent Advances in Mechatronics, Vol. II, pp. 940-945, 1995.